Jump to content


  • Content Count

  • Joined

  • Last visited

Community Reputation

2 Neutral

About Irongame199

  • Rank
  • Birthday 01/04/1999

Profile Information

  • Gender

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. So the installer finished with unidentified error 0 and I rebooted and successfully booted into mac os x so now I need to find graphics drivers and wifi, is there anywhere where I could look for those? Thanks so much for your help!
  2. Oh ok I will try that and I will notify if it works, thanks 👍
  3. @Nireshby any chance could my BIOS settings be wrong, also do I need to disable USB 3.0 and then turn usb legacy mode on enabled, disabled or auto?
  4. @Niresh It should work now. Log file (.txt): https://drive.google.com/file/d/1F77W9t1fFphj8h0JOtI3O6VGNVuyPimb/view?usp=drivesdk Image: https://drive.google.com/file/d/1sGaMnqZmKFBHqTKD4hrrYU6i26xEHAYO/view?usp=drivesdk
  5. @Niresh This is the log file from the Mac OS X installer, if that helps. Also the picture of the failed install.
  6. Yes I have but can it be because I don't have UEFI bios, because when I went back to my windows 8.1 install disk it said cannot install windows on this disk because it's GUID, and my motherboard doesn't support UEFI.
  7. Also just to make sure, How big is the usb drive? Because if its bellow like 8 gb then that might be the problem. Also to add, when you make the bootable usb you wont be able to view both of the partitions on windows, you will only see a partition titled "HZ" which has about 100mb as total size.
  8. I have tried but the installation failed about 1-3 minutes in to the install and when I rebooted it just booted me back to the usb and in the bootloader install Hackingtosh High Sierra Zone was the only option. Is it possible that the installer was corrupt when I downloaded it or that transmac didnt make the bootable usb installer properly?
  9. Hello, I have tried to install Mac OS X Sierra for qiute a long time but I failed so I switched to Mac OS X High Sierra where I had less problems until the installer said Install failed or something like that and when i checked the log in one of the lines i saw something like this: 'missing systemversion.plist' Is there anything im missing? The only bootflag I used was ncpi=0x2000. Thanks!
  10. I have tried to boot to the volume through the install usb with no success so I decided to try install Mac OS X High Sierra Zone with AMD support and now I get a different error, I get stuck on 'HID: Legacy shim 2' as I am new here I have no idea of what that means. Anyways thanks!
  11. Does it say Unidentified eror: 0 or something like that, if so try rebooting and try to boot into the OS X because I read about that error in a few forums and it says that they just restarted and everythings was working alright.
  12. Basically I have installed Mac OS X 10.12.3 (Sierra Zone) and the installer went successfully and installed everything i customised the install to install chameleon as the bootloader because my board doesnt support UEFI and now when i restart after install it shows me and option to boot either form the isntall usb or to boot to Mac OS X 10.12, when I choose to boot to Mac OS X 10.12 it instantly reboots my PC back to the chameleon bootloader. My specs: AMD FX 8320 Eight-Core 3.5GHz ASUS M5 A78L-M USB3 AMD Radeon HD 6900 series 18GB Kingston Ram 120GB Kingston SSD Please help, Thanks.
  13. Hello, I have found the solution "AppleUSBECHI: stop/restart" problem because I had the same issue and what I did was I typed in the boot flag like this: Kernel.amd -v PCIRootUID=1 ncpi=0x2000 But you may need to use one of these: Kernel.amd -v PCIRootUID=1 npci=0x1000 or Kernel.amd -v PCIRootUID=1 npci=0x2000 or Kernel.amd-v PCIRootUID=1 ncpi=0x3000 Hope that helps, Good luck!
    Hello, I was going to ask if by any chance this install would work with non-EUFI motherboard? Also I am not sure if my specs are good enough since I installed a Hackintosh only once on another PC. My specs: CPU: AMD FX 8320 Eight-Core 3.5GHz GPU: AMD Radeon HD 6900 Series RAM: 18Gb Motherboard: ASUS M5 A78L-M USB 3 Thanks! 😁
  14. Would this support AMD FX 8320 and AMD Radeon HD 6900?
  • Create New...